SMC电磁阀气动技术的优点:

SMC电磁阀气动技术的优点:

1、气动装置结构简单、轻便、安装维护简单。压力等级低、故使用安全。

2、工作介质是取之不尽的空气、空气本身不花钱。排气处理简单, 不污染环境,成本低。

3、输出力以及工作速度的调节非常容易。气缸的动作速度一般为50~500mm/s ,比液压和电气方式的动作速度快。

4、可靠性高,使用寿命长。电器元件的有效动作次数约为百万次,而SMC的一般电磁阀的寿命大于3000万次,小型阀过2亿次。

5、利用空气的压缩性,可贮存能量,实现集中供气。可短时间释放能量,以获得间歇运动中的高速响应。可实现缓冲。对冲击负载和过

负载有较强的适应能力。在一定条件下,可使气动装置有自保持能力。

6、气动控制具有防火、防爆、防潮的能力。与液压方式相比,气动方式可在高温场合使用。

7、由于空气流动损失小,压缩空气可集中供应,远距离输送。

组成的气动回路是为了驱动用于各种不同目的的机械装置,其重要的三个控制内容是:力的大小、力的方向和运动速度。与生产装置相

连接的各种类型的诳,靠压力控制阀、方向控制阀和流量控制阀分别实现对三个内容的控制 

云联电气 技术支持

SMC solenoid valve VFS1120-5DZ-01/VFS1220-4DB-01 pneumatic valve pilot valve

Advantages of pneumatic technology:

1. The pneumatic device has a simple and lightweight structure, and is easy to install and maintain. Low pressure level, therefore safe to use.

2. The working medium is inexhaustible air, and the air itself does not cost money. The exhaust treatment is simple, does not pollute the environment, and has low cost.

3. The adjustment of output force and working speed is very easy. The action speed of the cylinder is generally 50-500mm/s, which is faster than the action speed of hydraulic and electrical methods.

4. High reliability and long service life. The effective action frequency of electrical components is about one million times, while the service life of general solenoid valves in SMC is more than 30 million times, and that of small valves is over 200 million times.

5. Utilize the compressibility of air to store energy and realize centralized gas supply. It can release energy in a short period of time to achieve high-speed response during intermittent movements. Can achieve buffering. Impact load and overload

The load has strong adaptability. Under certain conditions, pneumatic devices can have the ability to maintain themselves.

6. Pneumatic control has the ability to prevent fire, explosion, and moisture. Compared to hydraulic methods, pneumatic methods can be used in high-temperature situations.

7. Due to low air flow loss, compressed air can be supplied centrally and transported over long distances.

The pneumatic circuit is composed to drive mechanical devices for various purposes, and its three important control contents are: the magnitude of force, the direction of force, and the speed of motion. Related to production equipment

Various types of connected valves are controlled by pressure control valves, directional control valves, and flow control valves, respectively